DILUTION: Use straight out of the can.
If necessary, dilute with water. Diluting Chroma Key paints may make coverage less even.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin, even, uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
FILM THICKNESS: 2 mil. Dry Film
COVERAGE: Appx 300 sq. ft. per gallon
AVG. DRY TIME: AT 75°F (24°C) Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours
CLEAN-UP: Soap and water
SHELF LIFE: Minimum 24 months
Duracell Procell PC1604 Alkaline Battery
GypSnow
Furnie Pads
HollyNorth AC Pouch Large
Pelican Desiccant Silica Gel
Kryolan Tear Stick
3/4" Friction Tape
Kryolan Glatzan Bald Cap
Kryolan Rubber Mask Grease Palette - Pro
Mehron Castor Sealer
CITC Director Fan
Kryolan Blood Capsules TF
LED Stage Marker (Red/Green)
Disposable Tapered Head Mascara Wands (25 Pack)
Steelie Orbiter Dash Mount Kit
CITC Director Junior Fan
Static Kernmantle Rope
Telesis Beta Bond
2" Double Sided Masking Tape
Tubular Webbing
Smoke Tube (Smoke Special Effects)
Duracell Procell PC1400 'C' Alkaline Battery
Gorilla Epoxy Putty Stick
Kryolan Bald Cap Mold Block (Read Head)
Ultratec Power Fog Industrial 9D - Fog Machine
Pelican M11 Rechargeable Flashlight
Cheesecloth 100% Cotton
Rosco FlexBond Adhesive
3M Hi-Strength 90 Spray Adhesive (500g)
Mag-Lite Rechargeable Bulb
Pyroflash 6/24 Controller
Streamlight Fire Vulcan Vehicle Mount System
Z-7 Debonder Adhesive Remover
Steelie Bar Mount Component 









Reviews
There are no reviews yet.