FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS: 2 mil. dry film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
| Fluorescent Color Chips | ||
|  5779: White | |
|   5780: Red | |
|   5781: Orange | |
|   5782: Yellow | |
|   5783: Green | |
|   5784: Blue | |
|   5785: Invisible Blue | |
|   5786: Pink | |
Alumilite Flex 80 Rubber Casting Kit
Pelican 1300 Case
Camp Heat
Radio Chest Harness
ADJ Fog Fury Jett
Ultratec Show Fogger Pro
3M Super 77 Spray Adhesive (399g)
CITC HazeMax Water Vapour Haze Machine
Igeba Thermal Water Based Fog Generator
Duracell 28A Alkaline Battery
Pelican 1630 Transport Case
2" Conspicuity Tape
1″ x 15′ 3M 3000x Very High Gain Reflective Tape
Kryolan Orange Stipple Sponge
Ben Nye Concealer Palette 12 Colours
Picquic Sixpac Plus Screwdriver
Kryolan Tear Stick
Krylon Chalkboard Paint 












Reviews
There are no reviews yet.