FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS: 2 mil. dry film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
| Fluorescent Color Chips | ||
|  5779: White | |
|   5780: Red | |
|   5781: Orange | |
|   5782: Yellow | |
|   5783: Green | |
|   5784: Blue | |
|   5785: Invisible Blue | |
|   5786: Pink | |
CITC Little Blizzard Dry 100 Snow Fluid
LED Stage Marker (Red/Green)
Hurricane 5000 (110V) DMX
Kryolan Tear Stick
GE 33934 EKB Projector Light Bulb
Breakaway Ashtray
Streamlight Fire Vulcan Vehicle Mount System
3M Super 77 Spray Adhesive (399g)
CITC Director Fan
ShotMax Confetti Machine
Kryolan Lip Rouge Palette - Classic 2
Kryolan Rubber Mask Grease Palette - Pro
Ultratec Power Fog Industrial 9D - Fog Machine
Mehron Castor Sealer
Kryolan Cold Foam Set
Kryolan Blood Capsules TF
Rosco Flat Acrylic Glaze 










Reviews
There are no reviews yet.