FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS: 2 mil. dry film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
| Fluorescent Color Chips | ||
|  5779: White | |
|   5780: Red | |
|   5781: Orange | |
|   5782: Yellow | |
|   5783: Green | |
|   5784: Blue | |
|   5785: Invisible Blue | |
|   5786: Pink | |
Duracell Procell PC1300 'D' Alkaline Battery
Ultratec LSX MK II Low Smoke Converter
Kryolan Supracolor Cream Palette
Cardellini Laser Pointer Holder
3M Super 77 Spray Adhesive (399g)
CITC Little Blizzard Dry 100 Snow Fluid
Rosco Flat Acrylic Glaze 










Reviews
There are no reviews yet.