FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS: 2 mil. dry film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
| Fluorescent Color Chips | ||
|  5779: White | |
|   5780: Red | |
|   5781: Orange | |
|   5782: Yellow | |
|   5783: Green | |
|   5784: Blue | |
|   5785: Invisible Blue | |
|   5786: Pink | |
Ultratec EZ Kleen Preventative Maintenance Fluid
MCR Safety Goggles
Mehron Matte Spirit Gum
Ben Nye Concealer Palette 12 Colours
Rain-X® Interior Glass Anti-Fog Spray
Dynamic's Super Lid with Spout
LPS 1 Platinum Grade Greaseless Lubricant
Mehron Castor Sealer
Kryolan Blood Capsules TF
Master Padlock
Streamlight Fire Vulcan Vehicle Mount System
Kryolan Bald Cap Mold Block (Read Head)
Duracell Procell PC1400 'C' Alkaline Battery
Kryolan Rubber Mask Grease Palette - Pro
Duracell Procell PC1300 'D' Alkaline Battery
Kryolan Tear Stick
Streamlight 51101 Xenon Bulb
Rosco FlexBond Adhesive
Kryolan Supracolor Cream Palette
Mole Richardson Maroon Enamel Spray 












Reviews
There are no reviews yet.