FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS: 2 mil. dry film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
| Fluorescent Color Chips | ||
|  5779: White | |
|   5780: Red | |
|   5781: Orange | |
|   5782: Yellow | |
|   5783: Green | |
|   5784: Blue | |
|   5785: Invisible Blue | |
|   5786: Pink | |
CRL Professional Glass Cleaner
Roscopak Silver/Gold Reflector
Mehron Matte Spirit Gum
Kryolan Supracolor Cream Palette
Le Maitre G300 Smoke & Haze Machine
Durable Electrical Pouch
Duracell Procell PC1400 'C' Alkaline Battery
Ultratec Radiance Touring System
Macbeth Colour Checker Chart
Cinema Secrets Blood Gel
Ben Nye Concealer Palette 12 Colours
33" Safety Cable
Rosco FlexBond Adhesive
Kryolan Rubber Mask Grease Palette - Pro
Goof Off Pro Strength Adhesive Remover
Master Shielded Padlock
Kryolan Cold Foam Set
Antari B-100X Bubble Machine
Mole Richardson Maroon Enamel Spray 











Reviews
There are no reviews yet.