FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS: 2 mil. dry film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
| Fluorescent Color Chips | ||
|  5779: White | |
|   5780: Red | |
|   5781: Orange | |
|   5782: Yellow | |
|   5783: Green | |
|   5784: Blue | |
|   5785: Invisible Blue | |
|   5786: Pink | |
FogBlocker Anti-Fog Cloth
Mehron Castor Sealer
Bee Gum (Smoke Effects)
Pelican 1650 Large Case
Procore Professional Measuring Tape - 3/8" x 100'
Kryolan Cold Foam Set
Kryolan Tear Stick
Antari Z Fuel Bubble Fluid ZGB
Ultratec Power Fog Industrial 9D - Fog Machine
Low Maintenance Half Mask Respirator
Certainty Surface Sanitizing Wipes
Kryolan Blood Capsules TF
Brasso Longer Lasting Shine Metal Polish
Pelican TSA Lock
Rosco CrystalGel 












Reviews
There are no reviews yet.