FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION:Â Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION:Â Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS:Â 2 mil. dry film.
COVERAGE:Â Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN UP:Â Soap and water.
SHELF LIFE:Â Minimum 24 months.
Kryolan Supracolor Cream Palette
CITC 2" x 24" Air Cannon Confetti Launcher
Pelican 1610 Case
CITC Foam Dome
Kryolan Blood Capsules TF
Pelican 1650 Large Case
Skin Illustrator - Bloody Five Palette
CITC Director Junior Fan
Streamlight 90314 Black Dot Xenon BulbÂ
Ben Nye Concealer Palette 12 Colours
Alumilite Mini Casting Kit
Ben Nye Fireworks Wheel
Firebox Standard System (Streamlight) 45311
Le Maitre G300 Smoke & Haze Machine
3M Hi-Strength 90 Spray Adhesive (500g)
Master Shielded Padlock
Kryolan Lip Rouge Palette - Classic 2
Roscopak Silver/Gold Reflector
Ultratec Radiance Touring System
Ultratec Show Fogger Pro
Duracell Procell PC1400 'C' Alkaline Battery
GypSnow
Kryolan Cold Foam Set
Blasting Galvanometer
Kryolan Rubber Mask Grease Palette - Pro
Rosco Flat Acrylic Glaze 




Reviews
There are no reviews yet.