FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the colour concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
PACKAGING: 5 Gallon
Oakum
Duracell AA MN1500 Copper Top Alkaline Battery
Duracell Procell PC1400 'C' Alkaline Battery
Kryolan Rubber Mask Grease Palette - Pro
Duracell Procell PC1604 Alkaline Battery
Mack's Earplugs
Ultratec Power Fog Industrial 9D - Fog Machine
FBI HD Deluxe Earpiece Headset
Ben Nye Fireworks Wheel
2" Double Sided Masking Tape
Mehron Matte Spirit Gum
Ultratec Show Fogger Pro
Antari B-100X Bubble Machine
TT 3C Xenon Bulb - Streamlight
Krylon Dulling Spray
Jumbo Hurricane Blower
Streamlight 51105 Xenon Bulb
Ultratec EZ Kleen Preventative Maintenance Fluid
Kryolan Glatzan Bald Cap
Bohin Wool Comb
Krylon Rust Tough Hamm-R Finishes Spray
Wizard 50G3 Capacitor Discharge Firing Device
Kryolan Bald Cap Mold Block (Read Head)
GypSnow
Rosco Fog Fluid (4L)
Mole Richardson Maroon Enamel Spray
Rosco Flat Acrylic Glaze 


Reviews
There are no reviews yet.