FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the colour concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
PACKAGING: 5 Gallon
2" Double Sided Masking Tape
Cinema Secrets Original Brush Cleaner
CITC 2" x 24" Air Cannon Confetti Launcher
Duracell Procell PC1400 'C' Alkaline Battery
3/4" Friction Tape
Kryolan Blood Capsules TF
Cryo-Jet Hose 50'
Sculpey Polymeric Clay
Pelican 1300 Case
Pelican M11 Rechargeable Flashlight
Kryolan Supracolor Cream Palette
Mehron Castor Sealer
Acrylic Ice Cubes
Golf Tees
Z-7 Debonder Adhesive Remover
0/6 Campbell Studio Rigging Chain
3M Hi-Strength 90 Spray Adhesive (500g)
Krylon High Heat Paint 


Reviews
There are no reviews yet.