FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the colour concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
PACKAGING: Â Quart
Kryolan Bald Cap Mold Block (Read Head)
Blasting Galvanometer
Mehron Castor Sealer
Duracell Procell PC1400 'C' Alkaline Battery
33" Safety Cable
Tubular Webbing
Mehron Matte Spirit Gum
Ben Nye Highlighter Pencil
Acrylic Ice Cubes
Antari B-100X Bubble Machine
Kryolan Orange Stipple Sponge
Custom Made Slime
Clamps for Hackles
Draw Cord Shoe Bags (Clear) – 16" x 18" x 4" (10 bags/roll)
CITC 2" x 24" Air Cannon Confetti Launcher
Sharpie Magnum Permanent Marker
Laser Pointer On/Off Switch & Case
Disposable Tapered Head Mascara Wands (25 Pack)
Rosco V-Hazer Fog Fluid
Charger Holder
KN95 Disposable Mask
CITC Director Fan
ShotMax Confetti Machine
Cryo-Jet Hose 50'
Rosco FlexBond Adhesive
GypSnow
1" Foam Brush 



Reviews
There are no reviews yet.