FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the color concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN UP: Soap and water.
SHELF LIFE: Minimum 24 months.
Alumilite Flex 80 Rubber Casting Kit
Static Kernmantle Rope
33" Safety Cable
Ultratec Radiance Touring System
Hurricane 5000 (110V) DMX
3 Ply Disposable Face Mask
Antari B-100X Bubble Machine
CITC Director Fan
Streamlight 51105 Xenon Bulb
Z-7 Debonder Adhesive Remover
GypSnow
Kryolan Menthol Tear Blower Refill
Rosco FlexBond Adhesive
Cryo-Jet Hose 50'
Sharpie Metallic Markers
Ben Nye Concealer Palette 12 Colours
Kryolan Tear Stick
Picquic Sixpac Plus Screwdriver
Kryolan Blood Capsules TF
Ultratec Power Fog Industrial 9D - Fog Machine
LiteBox Bulb - Streamlight
Ben Nye Fireworks Wheel
Firebox Standard System (Streamlight) 45311
Pyroflash 6/24 Controller
Krylon Dulling Spray 




Reviews
There are no reviews yet.