FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the color concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN UP: Soap and water.
SHELF LIFE: Minimum 24 months.
Jumbo Hurricane Blower
Kryolan Menthol Tear Blower Refill
Webbing with HD Ratchet
1" Foam Brush
Acid Yellow 73 Fluorescein
33" Safety Cable
Rosco Lens Tissue
Ben Nye Concealer Palette 12 Colours
Scorpion Flashlight Head Assembly
Oakum
MegaPro Original Screwdriver
Duracell Procell PC1604 Alkaline Battery
Osram EHJ 64655 HLX Halogen Bulb
CITC High Performance Haze Fluid
Kryolan Bald Cap Mold Block (Read Head) 



Reviews
There are no reviews yet.