FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the color concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN UP: Soap and water.
SHELF LIFE: Minimum 24 months.
Flame Gel
MegaPro Stainless Steel Screwdriver
Osram EHJ 64655 HLX Halogen Bulb
Ben Nye Concealer Palette 12 Colours
QF14 Powder Brush
Kryolan Cold Foam Set
CITC Director Fan
3/4" Friction Tape
Steelie Bar Mount Component
GypSnow
CITC Director Junior Fan
Disposable Tapered Head Mascara Wands (25 Pack)
Ultratec Party Fog Fluid
Duracell Procell PC1604 Alkaline Battery
Kryolan Blood Capsules TF
Kryolan Orange Stipple Sponge
Blasting Galvanometer
2" Double Sided Masking Tape
Hurricane 5000 (110V) DMX
Snow Blanket Roll
Can Holder Pouch
Mehron Matte Spirit Gum
Sculpey Polymeric Clay
Picquic Sixpac Plus Screwdriver
Cheesecloth 100% Cotton
QF12 Small Contour Brush
Ultratec EZ Kleen Preventative Maintenance Fluid
Kryolan Tear Stick
Camp Heat
Le Maitre G300 Smoke & Haze Machine
Bee Gum (Smoke Effects)
Rosco Flat Acrylic Glaze 



Reviews
There are no reviews yet.