FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the color concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN UP: Soap and water.
SHELF LIFE: Minimum 24 months.
Sculpey Polymeric Clay
Cardellini Laser Pointer Holder
A&B Smoke
Osram AirZing Pro 5030 UNIV
Lintless Swabs 1 1/2" x 6" - 30/pk
Picquic Sixpac Plus Screwdriver
MegaPro Original Screwdriver
3/4" Friction Tape
Crosby 1/2" Wire Rope Clip
Cinema Secrets Original Brush Cleaner
Custom Made Slime
Rosco Fog Fluid (4L)
33" Safety Cable
Z-7 Debonder Adhesive Remover
Ultratec EZ Kleen Preventative Maintenance Fluid
Ultratec Silent Storm Snow Machine DMX
Pelican Desiccant Silica Gel
Snow Wool Batt
Master Shielded Padlock
Powdered Snow Frost
Eagle HB Pencil - 12/box
GypSnow
Smoke Tube (Smoke Special Effects)
Krylon High Heat Paint 


Reviews
There are no reviews yet.