FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the color concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN UP: Soap and water.
SHELF LIFE: Minimum 24 months.
Kryolan Rubber Mask Grease Palette - Pro
Sculpey Polymeric Clay
Roscopak Silver/Gold Reflector
GypSnow
Kryolan Blood Capsules TF
Lockable Storage Container 60L
Mehron Matte Spirit Gum
CITC Director Junior Fan
Custom Made Slime
Pelican 1620 Large Case
Vermiculite
Flame Gel
Tork Wipes Dispenser
Rosco CrystalGel
Igeba Thermal Fog Generator (TF-35)
Laser Pointer On/Off Switch & Case 


Reviews
There are no reviews yet.