FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the color concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN UP: Soap and water.
SHELF LIFE: Minimum 24 months.
Ultratec Power Fog Industrial 9D - Fog Machine
Master Padlock
Cheesecloth 100% Cotton
Flame Gel
Steelie Bar Mount Component
GypSnow
Oakum
Rosco FlexBond Adhesive
Camp Heat
2" Double Sided Masking Tape
Ultra Materials Ultra Sculpt (Sculptable Stage Makeup)
Duracell Procell PC1400 'C' Alkaline Battery
Sheik Non-Lubricated Condoms - For Special Effects
Ultratec Silent Storm Snow Machine DMX
Scorpion Flashlight Head Assembly
Z-7 Debonder Adhesive Remover
3/8" Disposable Acid Brush 



Reviews
There are no reviews yet.