DILUTION: Use straight out of the can.
If necessary, dilute with water. Diluting Chroma Key paints may make coverage less even.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin, even, uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
FILM THICKNESS: 2 mil. Dry Film
COVERAGE: Appx 300 sq. ft. per gallon
AVG. DRY TIME: AT 75°F (24°C) Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours
CLEAN-UP: Soap and water
SHELF LIFE: Minimum 24 months
Ultratec Party Fog Fluid
CITC High Performance Haze Fluid
DSC Labs Billups VF/X Chart
3M Hi-Strength 90 Spray Adhesive (500g)
Kryolan Glatzan Bald Cap
Flame Gel
Kryolan Tear Stick
Kryolan Cold Foam Set
Cryo-Jet Assembly
Kryolan Rubber Mask Grease Palette - Pro
3/4" Friction Tape
Rosco FlexBond Adhesive
A&B Smoke
Kryolan Lip Rouge Palette - Classic 2
Mehron Matte Spirit Gum
Breakaway Sugar Container
33" Safety Cable
Kryolan Menthol Tear Blower Refill
Macbeth Colour Checker Chart
Evercare Extreme Stick Lint Roller
Ben Nye Fireworks Wheel
Sculpey Polymeric Clay
Z-7 Debonder Adhesive Remover 










Reviews
There are no reviews yet.