FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS: 2 mil. dry film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
| Fluorescent Color Chips | ||
|  5779: White | |
|   5780: Red | |
|   5781: Orange | |
|   5782: Yellow | |
|   5783: Green | |
|   5784: Blue | |
|   5785: Invisible Blue | |
|   5786: Pink | |
Master Padlock
Kryolan Cold Foam Set
Igeba Thermal Water Based Fog Generator
Kryolan Blood Capsules TF
Kryolan Bald Cap Mold Block (Read Head)
Ben Nye Fireworks Wheel
Golf Tees
3M Hi-Strength 90 Spray Adhesive (500g)
Sew-On Fl. Orange Fabric w/ Silver Reflective 1-1/2" x 50yrd
Duracell Procell PC1400 'C' Alkaline Battery
3/4" Friction Tape
1" Foam Brush
Kryolan Glatzan Bald Cap
Rosco CrystalGel 











Reviews
There are no reviews yet.