FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the color concentration and create “glaze” effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a goad quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
FILM THICKNESS: 2 mil. Dry Film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated in 1-2 hours.
CLEAN UP: Soap and water.
SHELF LIFE: Minimum 24 months.
Duracell Procell PC1604 Alkaline Battery
Plain Chipboard Sheets
Streamlight 51105 Xenon Bulb
Stainless Steel Stand for Touchless Sanitizer Dispenser
CITC High Performance Haze Fluid
Kryolan Rubber Mask Grease Palette - Pro
Cinema Secrets Woochie Bald Cap
Kryolan Menthol Tear Blower Refill
Packing Tape Gun
Mehron Matte Spirit Gum
A&B Smoke
GypSnow
Krylon Dulling Spray 



Reviews
There are no reviews yet.