FINISH: Matte
SOLVENT: Water
BINDER TYPE: Vinyl Acrylic
DILUTION: Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint.
SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
FILM THICKNESS: 2 mil. dry film.
COVERAGE: Approximately 300 sq. ft. per gallon.
AVG. DRY TIME: At 75°F (24°C). Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.
CLEAN-UP: Soap and water.
SHELF LIFE: Minimum 24 months.
| Fluorescent Color Chips | ||
|  5779: White | |
|   5780: Red | |
|   5781: Orange | |
|   5782: Yellow | |
|   5783: Green | |
|   5784: Blue | |
|   5785: Invisible Blue | |
|   5786: Pink | |
Rosco FlexBond Adhesive
Disposable Tapered Head Mascara Wands (25 Pack)
Draw Cord Boot Bags (Clear) - 20" x 24" x 4" (10 bags/roll)
CITC 2" x 24" Air Cannon Confetti Launcher
Kryolan Cold Foam Set
3/4" Friction Tape
Kryolan Orange Stipple Sponge
Mehron Castor Sealer
Kryolan Tear Stick
Kryolan Blood Capsules TF
Clamps for Hackles
2" Back Pressure Caps
Krylon Dulling Spray 












Reviews
There are no reviews yet.